" "

How to Can Chili Con Carne (with meat and beans) Con Carne/ Meat and Beans Chili Recipe

Must Try

Ever wished you could open a jar of your own homemade chili on a cold winter day? It’s possible when you learn how to can your own chili in jars!  

This article will teach you how to can your own chili (chili con carne – with beans and meat). You’ll soak the beans first, then cook your meat, vegetables, and flavorings before combining together in a flavorful chili mixture that is pressure canned in pint jars.  

Extended Directions and Expert Tips for Canning Chili  


This recipe makes about 9 pint jars. The original recipe from NCHFP doesn’t include processing times for quarts, so it isn’t recommended. I’m guessing this is because the beans make for a thicker mixture that probably won’t heat through the same way in a larger size.  

Know your Canner

Before you start this project, if you are not familiar with using a pressure canner I recommend reading  How to use a pressure canner.  It will familiarize you with how your canner works and what steps to take to get set up for any canning project.  

Because this recipe contains meat and beans, it must be pressure canned for safety.  


3 cups Dried Beans (pinto or red kidney) 

5 ½ cups Water 

5 teaspoons Salt (separated)  

3 pounds Ground Beef 

1 ½ cups Onion(s), chopped 

1 cup Peppers, chopped (your choice of type, but also optional) 

1 teaspoon Black Pepper 

3-6 Tablespoons Chili Powder 

2 quarts Tomatoes  

Instructions for Making & Canning Chili  

Wash beans and put them in stock pot with cold water, enough to cover 2-3″ above beans. Soak for 12-18 hours. I usually let the beans soak overnight, because that’s the easiest way to make sure they’re ready later.  

Drain and discard soaking water. Combine beans with 5 1/2 cups fresh water, adding the 2 tsps salt. 

Bring to boil. Reduce heat & simmer for 30 minutes. Drain and discard water again.  

Chop onions and peppers. I used my hand held pampered chef food chopper pictured above.  There are many brands available.   You can also use an electric chopper to make things quick and easy.  

Tip! Don’t over chop.  Remember this will cook and depending on how chunky you like your veggies you don’t want them chopped too small.   

In large pan or skillet, cook ground meat with chopped onions and peppers. Drain off fat. 

Add 3 tsps salt, along with other seasonings, tomatoes, and drained cooked beans. Simmer 5 minutes.

Do NOT thicken. This is important for safety reasons, so the heat can reach deep enough into the jars. 

Ladle hot chili into hot jars, leaving 1” head space.

Remove bubbles, wipe the rims clean, and place on seals and rings.

Place jars in a warm canner. 


This recipe can be adapted with a few minor tweaks. But remember the pressure canning process is specific to this recipe as written with the following few things that can be adjusted.

Can I can my own homemade chili recipe?

Canning your homemade chili is fine, but the recipe should adapted to conform to home canning. If your homemade recipe is close maybe you can adapt it slightly. This adapting will need to include how you prepare your ingredients. The beans need to be prepared as written in the directions.

Can I Substitute Another Seasoning? 

Dry seasonings are generally adjustable. So if you’d like more chili powder it is fine to add more.  If you are trying to control salt and want to use less, that is fine as well.  You can also add things like garlic powder, cumin, dried oregano or other seasonings as long as they are dried and not fresh.   

Can I use hot peppers?

Yes, absolutely. If you like hot hot hot chili, substitute some jalapeño or other spicy pepper for the bell peppers.  Just don’t change the amount of peppers. It is a straight across substitution.   You can also leave out some of the veggies if you like.  For instance if you don’t want peppers at all but just like onion.  That is fine.  Do not change the amounts of other ingredients. Just leave out the pepper and keep the amounts of the rest the same.   

Can I use already canned tomatoes?  

Yes, if you’ve got home canned tomatoes or commercially canned tomatoes you can use them in this recipe.  You can also use fresh tomatoes.  Just chop them and measure them out the same.  

Adjusting the Beans from This Recipe?  

Beans do impact the processing time of a recipe. For this recipe don’t adjust the amount of beans. If you’d prefer no beans, there is a recipe from Ball Blue Book, which contains just a spicy meat mixture without any beans. Bernardin also has a recipe for chili without beans.

Adding beans later works perfectly if you want more beans. Simply open a jar of chili and a jar of canned beans, combine them and you’ve got chili with extra beans.  Even easier, you could can the ingredients separately and then create your chili later. Having the basic ingredients canned separately in pint jars makes pulling together a chili recipe later quick and easy. Take a jar of canned ground meat plain, then combine with your choice of canned beans and canned tomatoes, then add veggies, seasonings and other ingredients to make a fast chili when you open the jars.   

Can I Substitute Another Ground Meat for Ground Beef in This Recipe?  

This recipe is fine for beef or venison.   You can not substitute in ground chicken or turkey since those are not recommended for canning purposes.   

Frequently Asked Questions  

How do you make canned chili go farther?  If you want to extend your chili later, you can stretch it by stirring in additional beans or vegetables after you open the jar to serve it. (and maybe adding a bit more spice too).  My mother in law (who raised 8 children!) was known to add rice to her chili.  I’m sure it was to make it stretch!   What’s the best onion for chili?   You can use whatever type of onion you have handy for this recipe. So red, white, yellow, or sweet onions would all work fine!     How long does canned homemade chili last? It is generally recommended that you keep canned chili, and other home canned goods, for about 1 year max. After that, it becomes more of a quality issue than a safety issue.  

Before You Go… 

Do you want to enjoy more fast, winter time meals? Chili isn’t the only type of meal you can put in jars! Here’s a recipe for canning beef stew too.

Recipe Card  

This printable recipe card is the recipe in brief! I’ve got more details, explanations and tips in the article above. If you skipped here, you might want to take a look at the other details included above too.  Learn how to adapt this to your taste.

Prep Time:19 hours hrsProcessing Pints (adjust for altitude):1 hour hr 15 minutes minsTotal Time:20 hours hrs 15 minutes mins

3 cups Dried Beans pinto or red kidney 5 ½ cups Water5 teaspoons Salt separated 3 pounds Ground Beef1 ½ cups Onion(s) chopped1 cup Peppers chopped, your choice of type (optional) 1 teaspoon Black Pepper3-6 Tablespoons Chili Powder2 quarts Tomatoes crushed or whole

After soaking beans step as listed below is complete, start by preparing your jars and getting water in the canner heating. You want the canner hot, but not boiling, when the jars are ready to be processed. If you are new to using a pressure canner, see this article for full pressure canning instructions. This includes more detailed information and step-by-step instructions on how a pressure canner works. For a Hot PackWash beans and put them in stock pot with cold water, enough to cover 2-3″ above beans. Soak for 12-18 hours.Drain and discard soaking water. Combine beans with 5 1/2 cups fresh water, adding the 2 teaspoons salt.Bring to boil. Reduce heat & simmer for 30 minutes.Drain and discard water again. In large pan or skillet, cook ground meat with chopped onions and peppers. Drain off fat.Add 3 teaspoons salt, along with other seasonings, tomatoes, and drained cooked beans. Simmer 5 minutes. Do NOT thicken.Ladle hot chili into hot jar – leaving 1” headspace.Remove bubbles, wipe the rim clean, and place on seal and ring.Place jar in the warm canner. Proceed to fill all jars.Process according to below directions.

Processing with a Pressure Canner
Place the jars in the warm canner. Proceed to fill all jars placing them in the prepared hot canner. 
Put the lid on the canner leaving the weights off.  Bring to a boil. Watch for the steam to start coming out the vent pipe in the lid.
Allow the steam to ‘vent’ for 10 minutes then put the weights on. Use the proper weight for your altitude (check the chart below) This is when pressure will start to build.  
When the pressure reaches the pressure required for your altitude (check the chart below) that is when you’ll start your time.  Process for the full time indicated, adjusting the heat as needed to maintain the correct pressure for the entire time.
When processing time is completed turn off the heat. Do not remove weights yet. Let the canner sit undisturbed until pressure comes back to zero. Do not try to speed up the cooling process.
Remove the weight and wait 5 minutes.
Open the lid to allow steam to escape. (carefully don’t let it hit your face or arms!) Leave the lid setting on top of the canner slightly ajar and wait 5 minutes.
Take the lid off the canner and remove your jars. (optionally you can wait another 5 minutes if the contents appear to be bubbling so hard it is coming out of the jars)
Put the jars a few inches apart on a thick towel and allow them to cool to room temperature undisturbed. 12 hours is suggested.
When the jars are cool, remove the metal bands, check the seals, and store the jars in a cool dark place.
Processing Instructions (Raw Pack or Hot Pack) 
Process pints for 1 hour 15 minutes, adjusting for altitude.  
Altitude Adjustments for Pressure Canner  
Altitude – Weighted Gauge 
0-1,000 ft – 10 pounds
1,001-8,000 ft – 15 pounds
Altitude – Dial Gauge  
0-2,000 ft – 11 pounds 
2,001-4,000 ft – 12 pounds 
4,001-6,000 ft – 13 pounds   
6,001-8,000 ft – 14 pounds 
Adapted from: Source: National Center for Home Food Preservation


National Center Home Food Preservation 

Ball Blue Book  

Benardin Canning  

Latest Recipes

More Recipes Like This